Pre-selection for industrial process valves

Which valve for your duty? Get a spec-ready answer in 60 seconds.

Tell us what the valve has to do, your medium, pressure, temperature and size. Our rule base screens all five valve types against their published envelopes — function, compatibility, ASME B16.34 pressure-temperature ratings, body and seat gates — then generates an RFQ-ready specification sheet you can send to any manufacturer.

Pre-selection reports are engineering aids, not final specifications — valve selection, materials, pressure class and testing scope must be confirmed with the manufacturer's engineering team.
Scope: industrial process valves — ball, gate, globe, check and butterfly. Control valves and safety/relief valves are deliberately out of scope — when your duty points there, this tool tells you so rather than guessing.
This is a free tool supported by Chinese manufacturing partners: on request, we can forward your inquiry to valve manufacturers we work with — that is how this tool stays free. We do not endorse, warrant, or act as agent for any manufacturer; supplier evaluation and due diligence remain your sole responsibility.

Your duty conditions

▾
▾
▾
▾
▾
▾
▾
▾
▾
°Bé goes to our team first — no safe automatic conversion (same rule as our sister tools).
▾
▾
Industry News
Jiangsu Shentong Valve has supplied valves for Petrobras' P-82 FPSO, which has sailed for the Búzios field; the valve types and quantities on that unit are not disclosed.
A DN1000, Class 300 slab gate valve package with a split electro-hydraulic actuator has shipped after shell-strength and sealing tests; the assembly is 5.8 m high and weighs 12 t.
More than 100 ball valves, including sizes up to 40 in. and ratings up to Class 900, have been delivered to a natural-gas project in Uzbekistan.
Technical Insights
The second edition extends the rated-torque table, adds mechanical-advantage requirements beyond worm gearboxes and sets an 80% retention condition along the stroke, while keeping integral valve gears and subsea gearboxes outside its scope.
API 609's tenth edition was published in May 2026 and enters the API Monogram Program on 1 December. Its scope runs from butterfly-valve design and materials to dimensions, pressure-temperature ratings and testing; the transition date controls the programme response, not every existing project.
The 2026 edition updates through-bolting while leaving the standard's basic division intact: flange and drive dimensions belong to the interface; valve torque, actuator sizing and the support-to-valve connection do not become a complete selection answer.